This post contains affiliate links. Read the full disclosure here.
Many enthusiasts believe that there are a lot of risks involved when you pull a vehicle. To reduce the risk, it is recommended that car owners get a tow package when they want to pull their vehicle. However, some car owners believe that a pull package is not needed when they want to pull their vehicle.
The truth is, they have been doing this without any risk. This made some people ask if they can pull a car without a tow package.
As a car owner, you shouldn’t tow your car when you do not have the pulling package. Nevertheless, depending on the weight of the vehicle and the distance, you can still go-ahead to pull your vehicle if you do not have a pulling package.
A vehicle of lesser weight can be pulled over a short distance without a pulling package. Check out this article for more information.
Read Also: How To Tow A Car Without Keys
How to tow your car without a towing package
The truth is that a pulling package makes the pulling experience hitch-free. While it is not advisable to pull without it because it is risky for both vehicles involved, you can still pull a lightweight vehicle over a short distance without the pulling package. Below are some of the procedures you can follow when you want to do this.
Get a chain
When you want to pull a vehicle without a pulling package, the first thing you should get is a chain or rope.
However, make sure you get a chain or rope that is very strong. This is because the weight of the vehicle might overwhelm the chain when you begin to move the vehicle. When this happens, the result might be catastrophic.
Attach it to the vehicle
Once you are sure that the chain or rope is strong enough to move the vehicle, you should then attach it. You should attach it to a secured place in the front of the vehicle you want to pull. This is because it is better and easier to pull forward.
When you have done this, you should then attach the other end of the rope or chain to the pulling vehicle. Make sure you attach it to a sturdy place at the back of the vehicle. You can also check the other end of the chain to confirm if you have done the right thing.
Get someone in the car
Before you begin to pull the car, make sure you get someone in the car. The person should first put the car in pulling mode or neutral mode. Since you are not using the pulling package, the person will have to stay in the car throughout the pulling.
It is the responsibility of the person to ensure that the car stays in place and to help maneuver it when you want to corner. However, ensure that the car that is about to be pulled has a functional brake.
Gently move the car
You cannot move the car the same way you will move a car with a pulling package. You have to be very careful when you do this. It is recommended that you move the car gently and drive at a slower speed. However, remember that you can only do this when you are pulling the car over a short distance.
Likely effects of towing a vehicle without the towing package
Though your car might appear perfect when you get to your destination, pulling without a package is risky. When you do it, there are some likely consequences. Highlighted below are some of the effects of pulling without a pulling package.
One of the advantages of the pulling package, when you install it, is to ensure that the car stays in place when you are moving it. Since you did not install it, you will find it difficult to keep the car in place. In most cases, it will be difficult to keep the car in a straight line behind the pulling vehicle.
This issue is usually experienced when the pulling vehicle maneuvers in a different direction.
With a pulling hitch, you can be assured that the vehicle is secured and has a safe pulling experience. When the pulling hitch is not installed, there will be pressure on the pulling vehicle, especially if it cannot pull the vehicle it is used for.
By the time you finish the pulling, that vehicle will likely have mechanical issues.
When you have the pulling package, all you have to do is to use the hitch, and do other necessary things, and you begin to pull the car.
When you do not have the pulling package, you will start by getting a rope or chain, tying it to both ends, and moving at a slower speed during the pulling. By summing up the time you use for the pulling, you will discover that you have wasted a lot of time.
Read Also: Are Tow Mirrors Worth It?
Before you begin to pull your vehicle without the pulling package, you should consider the damage it could cause the vehicle involved. The truth is that if you do this often, there is a high chance that both vehicles will wear out quicker than you thought.
Apart from this, the part of the vehicle that you attached the rope or chain is prone to quick wear.
A pulling package might be relatively expensive but it will be easier and better in the long run. This is because the amount it will cost you to fix issues that could happen with the vehicle is more than what it will cost you to buy the pulling package.
Limited pulling distance
If you desire to pull your car to a location that is far from where your car is, you will have to get the pulling package. You can only pull it within the shortest distance. If you engage in pulling a long distance without the pulling package, you are ruining both cars.
What you should do before you install a towing package
Installing the pulling package is easy but there are some things you should do before you install one. You need to do this to avoid having issues with the pulling package or when you are pulling the car. Here is a list of some of the things you should do before you install a pulling package.
Contact the dealer
The first thing you should do is to contact the dealer of the pulling package. You should tell the dealer the details of your car such as name, model, year of production, etc. You can then request a quote on a pulling package that is suitable for your vehicle.
Alternatively, you can buy the pulling package yourself. If you are doing this, make sure you have all the right information about your vehicle.
The distance is important
Before you buy a pulling package, make sure you know the exact location where you are pulling the vehicle to. This is because distance is an important factor that will determine the type of pulling package that you will buy.
If you buy an inappropriate one, you will likely have issues when you are pulling the vehicle.
Know the weight of your vehicle
There are different pulling packages and the gross weight of vehicles they are suitable for differs. Before you install a pulling package, you should know the weight of your vehicle and be sure that the one you have bought is suitable for the weight of the vehicle.
How to install a towing package
You should not experience any issues when you want to install the pulling package. Nevertheless, you will likely have issues if you install the package wrongly. Below are some of the procedures you can follow when you want to install the pulling package.
Engage the parking brake
Well, before you start the installation process, the first thing you should do is to engage the parking brake of the car. Once you are through with this, you should use chocks for all the wheels.
Jack the car
Once you are through with the step above, you can then get a jack and raise the vehicle. Doing this will ensure that you have the right ground clearance to install the package.
Arrange the pull hitch
This is one of the areas where you should be very careful. The process of doing this differs, depending on the manufacturer. You can check the manual for more guidance on how to do this. Nevertheless, ensure that you do not overtighten the bolts.
Some vehicles do not have holes where you can tighten the bolts. If yours does not have such holes, you can drill holes into the car frame.
Attach the hitch
After the careful arrangement of the pull hitch, you can then attach it to the car frame. You will need the C-clamp to do this. However, if you have any issues during the installation, do not hesitate to ask for help.
Conclusion – Can You Tow Without A Towing Package?
There are different types of pulling packages and the capacity differs. Before you buy any, you should be convinced you are buying the right one for your vehicle.